| 高温除湿干燥机的实验和分析 | |
| 陈军 ; 史琳 ; 张金龙 ; 张璧光 ; CHEN Jun ; SHI Lin ; ZHANG Jin-long ; ZHANG Bi-guang | |
| 2010-06-08 ; 2010-06-08 | |
| 关键词 | 除湿干燥机 分析 能耗分析 木材干燥 高温混合工质 dehumidifying heat pump, exergy analysis, energy analysis, lumber drying, high temperature mixed-refrigerant TS64 |
| 其他题名 | Exergy analysis and experiments on high temperature dehumidifying heat pump |
| 中文摘要 | 该文介绍了作者自行设计的高温除湿干燥机的特点,以及在木材干燥生产中的工业试验研究结果.该高温除湿干燥机利用清华大学研制的高温环保工质HTR01直接灌装R22制冷机组.除湿机出口风温可稳定达到86℃以上,能够与常规蒸汽干燥窑干燥工艺相匹配.除湿比能耗(SPC)在0.38～1.04之间.通过对试验结果的分析表明,减少压缩机损和压缩机入口管路的损可以提高设备的性能.; A high temperature dehumidifying heat pump designed by the authors was introduced. Using this device, our new refrigerant named THR01 under medium and high temperature conditions was tested. The out temperature could reach and keep over 86℃ and match with conventional vapor drying kiln. The specific power consumption is between 0.38 and 1.04. Based on the experimental data, exergy analysis shows that the performance of the heat pump is better and the exergy losses in the compressor and in the pipes of compressor entry are key factors influencing the exergy efficiency of the heat pump. |
| 语种 | 中文 ; 中文 |
| 内容类型 | 期刊论文 |
| 源URL | [http://hdl.handle.net/123456789/50540]  |
| 专题 | 清华大学 |
| 推荐引用方式 GB/T 7714 | 陈军,史琳,张金龙,等. 高温除湿干燥机的实验和分析[J],2010, 2010. |
| APA | 陈军.,史琳.,张金龙.,张璧光.,CHEN Jun.,...&ZHANG Bi-guang.(2010).高温除湿干燥机的实验和分析.. |
| MLA | 陈军,et al."高温除湿干燥机的实验和分析".(2010). |
| 个性服务 |
| 查看访问统计 |
| 相关权益政策 |
| 暂无数据 |
| 收藏/分享 |
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论