CORC  > 清华大学
湍流环形通道热泳脱除可吸入颗粒物技术研究
周涛 ; 杨瑞昌 ; 赵磊 ; Zhou Tao ; Yang Ruichang ; Zhao Lei
2010-06-08 ; 2010-06-08
关键词双壁冷却 热泳 可吸入颗粒物 湍流 沉积效率 two cooled wall thermophoresis inhaled particle matter turbulence deposition efficiency X701.2
其他题名Technical study on removing inhaled PM 2.5 by using thermophoresis in annular channel with turbulent flow
中文摘要湍流中PM 2.5粒子的热泳沉积是国际上研究热门课题。但目前单纯热泳沉积效率也不过20%左右。依据热泳基本原理,设计了一种新型湍流方环形双壁冷却式通道。计算表明,该类型通道比一般单管通道有着较高的可吸入颗粒物脱除效率。同时,利用湍流的沉积效率,加上热泳沉积效率,可以达到较高的总泳沉积效率。通过结构设计,可以提高可吸入颗粒物的脱除效率,是值得进一步探索的新路子。; The thermophoretic deposition of PM 2.5 in turbulent flow is an international research hotspot.But,the usual thermophorertic deposition of PM 2.5 in turbulent flow is about 20% or so.A kind of new turblent flow in annular square channel with two cooled wall was designed on basic thermophoresis principle.The calculation indicates that this kind of channel has higher the thermophoretic deposition efficiency for removing inhaled(PM 2.5) than usual single tube channel.At meantime,the total deposition efficiency can reach very high through combination of the thermophoretic deposition efficiency with the turbulent deposition efficiency.It is worth more exploring new way that the deposition efficiency for removing inhaled PM 2.5 is enhanced by using configuration design.; 国家“973”重点基础研究发展规划项目子项目(2002-CB211604)
语种中文 ; 中文
内容类型期刊论文
源URL[http://hdl.handle.net/123456789/50321]  
专题清华大学
推荐引用方式
GB/T 7714
周涛,杨瑞昌,赵磊,等. 湍流环形通道热泳脱除可吸入颗粒物技术研究[J],2010, 2010.
APA 周涛,杨瑞昌,赵磊,Zhou Tao,Yang Ruichang,&Zhao Lei.(2010).湍流环形通道热泳脱除可吸入颗粒物技术研究..
MLA 周涛,et al."湍流环形通道热泳脱除可吸入颗粒物技术研究".(2010).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace