CORC  > 清华大学
人工心脏传子系统数学建模与仿真
常宇 ; 冯辅周 ; 郝冬梅 ; 乔爱科 ; Jooho Yang ; 曾衍钧 ; CHANG Yu ; FENG Fuzhou ; HAO Dongmei ; QIAO Aike ; YANG Jooho ; ZENG Yanjun
2010-06-08 ; 2010-06-08
关键词人工心脏 主动式磁轴承 线性二次控制器 artificial heart AMB LQR R318.1
其他题名Modeling and Simulation of a Rotor System in an Artificial Heart
中文摘要目的研究用于左心室辅助装置(LVAD)的无磨损的血泵转子系统,为第三代人工心脏即轴流血泵柔性转子建立数学模型并进行控制仿真分析。方法将血泵转子悬浮于主动式磁轴承(AMB)系统中,利用线性化方法建立系统简单的线性数学模型,利用状态变量反馈(SVFB)方法、全次元观测器(observer)设计和线性二次控制器(LQR)对系统进行控制仿真。结果与讨论人工心脏血泵转子系统对干扰的稳定延迟时间为350ms,稳态误差接近0,无超调现象,满足血泵转子系统设计要求。; Objective To deal with a rotor system of a wear-free heart pump used in a left ventricular assist device(LVAD),which is a basic research for the third generation artificial heart(AT).This study computes the mathematical modeling to the flexible rotor in the axial flow pump and simulates the control strategy to the system.Method A flexible rotor with translational and slop motions suspended in an active magnetic bearing(AMB) system.A linear mathematical modeling of the dynamic behaviour of the rotor is pointed out using linearization approximation laws.A control strategy is introduced using state variable free back(SVFB),full-order observer and linear quadratic regulator(LQR) methodologies.Conclusion and Discussion In the simulation,the settling time is 350ms,stead state error goes to zero,and no overshoot there is.The satisfied simulation shows the efficiency of the control strategy and validates the method applied to the pump.It is quiet a great progress for the third generation artificial heart in further study.; 国家自然科学基金(10072006); 北京市优秀人才培养专项经费(20042D0501501); 北京工业大学青年科研基金(97015999200401); 北京工业大学博士启动基金(52001211200401)资助
语种中文 ; 中文
内容类型期刊论文
源URL[http://hdl.handle.net/123456789/49775]  
专题清华大学
推荐引用方式
GB/T 7714
常宇,冯辅周,郝冬梅,等. 人工心脏传子系统数学建模与仿真[J],2010, 2010.
APA 常宇.,冯辅周.,郝冬梅.,乔爱科.,Jooho Yang.,...&ZENG Yanjun.(2010).人工心脏传子系统数学建模与仿真..
MLA 常宇,et al."人工心脏传子系统数学建模与仿真".(2010).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace