| 数控系统轨迹段光滑转接控制算法 | |
| 杨开明 ; 石川 ; 叶佩青 ; 吕强 ; YANG Kaiming ; SHI Chuan ; YE Peiqing ; LV Qiang | |
| 2010-06-08 ; 2010-06-08 | |
| 关键词 | 数控系统 光滑转接 插补控制 误差分析 computer numerical control system smooth transfer interpolation control error analysis TG659 |
| 其他题名 | Smooth transfer control algorithm for continuous segment trajectory in computer numerical control systems |
| 中文摘要 | 为了解决数控机床加工复杂轮廓时机床进给系统反复启停引起的加工效率低、加工质量差等问题,提出轨迹光滑转接插补控制算法。文中首先描述算法的求解过程,并对其进行了误差分析,然后建立机床伺服系统的数学模型,通过分析轨迹转接过程中伺服系统的动态响应特性,证明了控制算法的有效性。应用该算法进行实验,轨迹加工效率提高14.1%,轨迹误差小于3μm。结果表明,该算法在保证轨迹精度的前提下,通过轨迹段之间的光滑转接,实现多段轨迹的连续加工,提高了加工质量和加工效率。; When machining complex contours,the frequent starting and stoping of the machining tool feed system reduces the machining efficiency and the machining quality.A new control algorithm was developed to realize smooth transfers along a continuous segment trajectory.The control algorithm solution process was described with an error analysis.Amathematic model of a servo system with a lead screw drive was used to analyze the dynamic characteristics of the servo system in the transfer process.The results illustrate the control algorithm efficiency.A machining simulation shows that the machining efficiency is enhanced by 14.1% and the trajectory error is smaller than 3 μm which proves the feasibility of the algorithm in an actual machining process.This algorithm effectively improves machining efficiency and contour quality.; 国家“八六三”高技术项目(2004AA424160) |
| 语种 | 中文 ; 中文 |
| 内容类型 | 期刊论文 |
| 源URL | [http://hdl.handle.net/123456789/49199]  |
| 专题 | 清华大学 |
| 推荐引用方式 GB/T 7714 | 杨开明,石川,叶佩青,等. 数控系统轨迹段光滑转接控制算法[J],2010, 2010. |
| APA | 杨开明.,石川.,叶佩青.,吕强.,YANG Kaiming.,...&LV Qiang.(2010).数控系统轨迹段光滑转接控制算法.. |
| MLA | 杨开明,et al."数控系统轨迹段光滑转接控制算法".(2010). |
| 个性服务 |
| 查看访问统计 |
| 相关权益政策 |
| 暂无数据 |
| 收藏/分享 |
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论