ZG0Cr13Ni5Mo马氏体不锈钢的铸态高温力学性能测试研究 | |
张然 ; 康进武 ; 黄天佑 ; 柳百成 ; 胡永沂 ; ZHANG Ran ; KANG Jin-wu ; HUANG Tian-you ; LIU Bai-cheng ; HU Yong-yi | |
2010-06-08 ; 2010-06-08 | |
关键词 | ZG0Cr13Ni5Mo马氏体不锈钢 拉伸实验 高温力学性能 ZG0Cr13Ni5Mo martensite stainless steel Tensile test High temperature mechanical property TG142.71 |
其他题名 | Mechanical Properties of Martensite Stainless Steel at High Temperature |
中文摘要 | 应用Gleeble热模拟实验机,将试棒加热升温到奥氏体化温度并保温,然后再降至测试温度,得到了ZG0Cr13Ni5Mo马氏体不锈钢奥氏体状态下的高温力学性能参数。与直接将试棒加热至测试温度所测试的高温力学性能对比,发现两者在400℃~800℃之间弹性模量和屈服应力存在很大差别,前者弹性模量高,屈服应力低。在铸造过程应力场数值模拟中,应根据凝固过程中的组织变化,选择相应组织的高温力学性能用于计算。; The austenite mechanical properties of ZG0Cr13Ni5Mo stainless steel in the range of 400 ℃~1 000 ℃ were measured by the Gleeble thermal simulator.The tensile bars were heated to austenitizing temperature,held for austenization,and then cooled down to the test temperature for mechanical loading.Compared with the traditional method,i.e.heating up directly to the testing temperature,(actually,the tensile bar is still under martensite microstructure),the elastic modulus and yield strength in 400 ℃~800 ℃ were found to have a great difference between these two methods.The modulus of austenite structure is higher than that of martensite,while,its yield strength is far lower than that of matensite.In the thermal stress analysis of casting process,high temperature mechanical properties must be chosen according to the microstructure in the casting process.; 国家科技支撑计划课题(2007BAF02B07) |
语种 | 中文 ; 中文 |
内容类型 | 期刊论文 |
源URL | [http://hdl.handle.net/123456789/47984] ![]() |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | 张然,康进武,黄天佑,等. ZG0Cr13Ni5Mo马氏体不锈钢的铸态高温力学性能测试研究[J],2010, 2010. |
APA | 张然.,康进武.,黄天佑.,柳百成.,胡永沂.,...&HU Yong-yi.(2010).ZG0Cr13Ni5Mo马氏体不锈钢的铸态高温力学性能测试研究.. |
MLA | 张然,et al."ZG0Cr13Ni5Mo马氏体不锈钢的铸态高温力学性能测试研究".(2010). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论