QQ客服 官方微博 反馈留言

	电镀锡机组软熔导电辊脱锡技术研究
	符寒光 ; 闫丽芬 ; Fu Hanguang ; Yan Lifen
	2010-06-08 ; 2010-06-08
关键词	电镀锡 软熔导电辊 脱锡剂 粗糙度 electroplating tin reflow conductor roll removing tin agent roughness TQ153
其他题名	Study of Removing Tin Techniques for Reflow Conductor Roll
中文摘要	粘锡是电镀锡机组软熔导电辊失效的主要原因,应用化学方法脱锡是延长导电辊寿命的重要途径。开发了氢氯化钠(钾)为主要组成,并加入适量亚铅酸钠(钾)和硝酸(亚硝酸)钠配制而成脱锡剂,当脱锡剂温度为40- 80℃,导电辊表面温度为40-70℃时,对粘锡导电辊具有很好的脱锡效果。粘锡导电辊脱锡后的表面粗糙度可以恢复到4．0μm以上,导电辊使用寿命提高80％,降低导电辊修复成本90％,并大幅度减少导电辊更换时间,提高电镀锡机组生产作业率。; Adhering tin is the main cause that reflow conductor roll abates which works in the electroplating tin line (ETL). Removing the tin by means of chemical method is the important measures prolonging the servicing life of conductor roll. The tin remover whose main compositions are NaOH and KOH and assistant compositions are Na2PbO2 or K2PbO2 and NaNO3 or NaNO2 has excellent removing tin effect, while the temperature of removing tin liquid is 40- 80℃, and the temperature of conductor roll reaches 40-70℃. After removing the adhering tin layer of reflow conductor roll, the roughness of adhering tin conductor roll can resume to 4.0μm, its service life is increased by 80%, and repairing cost is decreased by 90% , and replacing conductor roll time can be obviously decreased, and production rate of ETL can be enhanced.
语种	中文 ; 中文
内容类型	期刊论文
源URL	[http://hdl.handle.net/123456789/47742]
专题	清华大学
推荐引用方式 GB/T 7714	符寒光,闫丽芬,Fu Hanguang,等. 电镀锡机组软熔导电辊脱锡技术研究[J],2010, 2010.
APA	符寒光,闫丽芬,Fu Hanguang,&Yan Lifen.(2010).电镀锡机组软熔导电辊脱锡技术研究..
MLA	符寒光,et al."电镀锡机组软熔导电辊脱锡技术研究".(2010).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。