| 聚合物水泥防水涂料的研制及其成膜机理 | |
| 陈立军 ; 陈丽琼 ; 张欣宇 ; 杨建 ; 李荣先 ; CHEN Lijun ; CHEN Liqiong ; ZHANG Xinyu ; YANG Jian ; LI Rongxian | |
| 2010-06-07 ; 2010-06-07 | |
| 关键词 | 聚合物 丙烯酸酯乳液 水泥 防水涂料 polymer acrylate latex cement waterproof coating TQ630.7 |
| 其他题名 | Development of polymer cement waterproof coating and its film forming mechanism |
| 中文摘要 | 以甲基丙烯酸甲酯(MMA)、苯乙烯(St)、丙烯酸丁酯(BA)为原料,以非离子乳化剂和阴离子乳化剂的混合乳化剂为乳化体系,过硫酸铵为引发剂,引入甲基丙烯酸(MAA)功能性单体,通过采用种子乳液聚合工艺,控制聚合物乳液的玻璃化温度,制备出性能优良的丙烯酸酯乳液,确定适合聚合物水泥防水涂料的聚合物乳液的较佳配方。研究了液粉比对聚合物水泥防水涂料拉伸性能和低温柔性的影响。同时还探讨了聚合物水泥防水涂料的成膜机理。; Adopting seed latex polymerization process and control the vitrification point of polymer latex,acrylate latex with excellent performance was prepared taking methyl methacrylate (MMA), styrene (St) and butyl acrylate (BA) as raw material, mixed emulsifier of nonionic emulsifier and anionic emulsifier as emulsification system,and ammonium persulfate as initiator and introducing functional monomer methacrylic acid(MAA).The preferred formula of polymer latex suitable for polymer-cement waterproof coating was determined. The influence of liquor/powder ratio on tensile property and low temperature flexibility of polymer-cement waterproof coating were studied. The film forming mechanism of polymer-cement waterproof coating was discussed as well. |
| 语种 | 中文 ; 中文 |
| 内容类型 | 期刊论文 |
| 源URL | [http://hdl.handle.net/123456789/44977]  |
| 专题 | 清华大学 |
| 推荐引用方式 GB/T 7714 | 陈立军,陈丽琼,张欣宇,等. 聚合物水泥防水涂料的研制及其成膜机理[J],2010, 2010. |
| APA | 陈立军.,陈丽琼.,张欣宇.,杨建.,李荣先.,...&LI Rongxian.(2010).聚合物水泥防水涂料的研制及其成膜机理.. |
| MLA | 陈立军,et al."聚合物水泥防水涂料的研制及其成膜机理".(2010). |
| 个性服务 |
| 查看访问统计 |
| 相关权益政策 |
| 暂无数据 |
| 收藏/分享 |
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论