TFT-LCD中聚酰亚胺取向剂用关键中间体4-BDAF的制备 | |
张建立 ; 尚洪勇 ; 梁晓 ; 刘鑫勤 ; ZHANG Jian-li ; SHANG Hong-yong ; LIANG Xiao ; LIU Xin-qin | |
2010-06-07 ; 2010-06-07 | |
关键词 | 取向剂 聚酰亚胺 4-BDAF 原料配比 alignment agent polyimide 4-BDAF material ratio TQ323.7 |
其他题名 | Preparation of Key Intermediate 4-BDAF Used for PI Alignment Agent of TFT-LCD |
中文摘要 | 4-BDAF是制备聚酰亚胺取向剂材料的关键中间体之一。自主设计了易于国产化的、全新的4-BDAF工艺合成路线。采用六氟丙酮、苯酚为起始原料,选择甲基磺酸为催化脱水剂,经过三步反应,通过优化原料配比、反应时间、反应温度等实验参数来选择最佳工艺条件。结果表明,在六氟丙酮、苯酚、催化剂的摩尔配比为1∶2∶2,反应温度控制在155℃,反应时间为11 h时的条件为最优工艺条件,4-BDAF的总收率达到57%。产品再经过精密提纯,在品质方面达到了国外公司产品的同等水平,价格具有明显优势,且易实现工业化量产。; Polyimide(PI) was widely used as alignment agent of TET-LCD because of its excellent advantages,while 4-BDAF was a key intermediate of alignment layer used for PI preparation.A new synthesis method of 4-BDAF was studied and the reaction conditions were optimized in this research.The results showed that optimal reaction conditions were: the molar ratio of hexafluroacetone,phenol and catalyst was controlled to be 1∶2∶2;methanesulfonic acid was chosen as the catalytic dehydrant;the reaction temperature was 155 ℃;and the reaction time was 11 h,respectively.The yield of 4-BDAF was 57%.The quality of the purified products could be equal to that from companies overseas.However,the price was competitive.And the technology could be industrialized easily.; 国家“863”计划资助项目(No.2007AA02Z226) |
语种 | 中文 ; 中文 |
内容类型 | 期刊论文 |
源URL | [http://hdl.handle.net/123456789/40617] ![]() |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | 张建立,尚洪勇,梁晓,等. TFT-LCD中聚酰亚胺取向剂用关键中间体4-BDAF的制备[J],2010, 2010. |
APA | 张建立.,尚洪勇.,梁晓.,刘鑫勤.,ZHANG Jian-li.,...&LIU Xin-qin.(2010).TFT-LCD中聚酰亚胺取向剂用关键中间体4-BDAF的制备.. |
MLA | 张建立,et al."TFT-LCD中聚酰亚胺取向剂用关键中间体4-BDAF的制备".(2010). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论