| 切角方柱压电超声微电机的研制 | |
| 刘涛 ; 陈宇 ; 路凯 ; 周铁英 ; LIU Tao ; CHEN Yu ; LU Kai ; ZHOU Tieying | |
| 2010-05-13 ; 2010-05-13 | |
| 关键词 | 超声微电机 光学相干断层扫描 内窥镜系统 有限元分析 micro-ultrasonic motor optical coherence tomography endoscope prototype finite element analysis TM359.9 |
| 其他题名 | Cubic micro-ultrasonic motor with truncated edge |
| 中文摘要 | 为了减小超声微电机的尺寸、简化加工工艺,研制了0.8mm切角方柱压电超声微电机,并对它进行了稳定性讨论和有限元仿真。压电方柱断面的极化电场分布不均匀,考虑极化电压对压电常数的影响,通过有限元数值仿真,优化计算得到了最优切角。当驱动电压峰峰值为65V时,样机的无载转速为2460r/min,堵转力矩为3.5μNm。该电机已用于光学相干断层扫描内窥镜系统中,对鸡食道进行离体成像,其横向分辨率为30μm。; A cube shaped micro-ultrasonic motor with truncated edge was developed to minimize the micro-motor size and simplify its fabrication.The motor stability was analyzed using a finite element analysis.Since the distribution of the polarized electric field was not uniform,the influence of the polarization voltage on the piezoelectric coefficient was taken into consideration to find the optimal size of the truncated edge.The no-load rotational speed is 2 460 r/min and the stall torque is about 3.5 μNm,when the peak drive voltage is 65 V.The motors were used in a prototype optical coherence tomography(OCT) endoscope.Analysis of a chicken esophagus in vitro gave a lateral resolution of 30 μm. |
| 语种 | 中文 ; 中文 |
| 内容类型 | 期刊论文 |
| 源URL | [http://hdl.handle.net/123456789/31866]  |
| 专题 | 清华大学 |
| 推荐引用方式 GB/T 7714 | 刘涛,陈宇,路凯,等. 切角方柱压电超声微电机的研制[J],2010, 2010. |
| APA | 刘涛.,陈宇.,路凯.,周铁英.,LIU Tao.,...&ZHOU Tieying.(2010).切角方柱压电超声微电机的研制.. |
| MLA | 刘涛,et al."切角方柱压电超声微电机的研制".(2010). |
| 个性服务 |
| 查看访问统计 |
| 相关权益政策 |
| 暂无数据 |
| 收藏/分享 |
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论