CORC  > 清华大学
轮胎侧径耦合振型及对三维模型的影响
李宝江 ; 管迪华 ; LI Baojiang ; GUAN Dihua
2010-05-13 ; 2010-05-13
关键词轮胎 模态参数 三维模型 静态侧倾特性 tire modal parameter 3-D model static camber property U463.341
其他题名Tire lateral-radial shape coupling and its influence on 3-D tire models
中文摘要针对文献中示出的轮胎存在侧径耦合振型的现象,考虑该现象可能对三维模型产生的影响。首先通过模态试验得到了某一子午线轮胎在侧向激励下的径向振型参数,并以相应的径向激振试验进行了验证。然后将得到的结果纳入到模态参数静态侧倾模型中,比较了纳入与否对模拟结果的影响。结果表明:对于一般轿车用子午线轮胎,轮胎侧径耦合振型对轮胎侧倾特性几乎没有影响,在建立三维轮胎模型时无需纳入。; Tire lateral-radial shape coupling may influence the predictions of 3-D tire models.The radial shape of a radial tire with lateral excitation was extracted first and then validated using the corresponding lateral shape with radial excitation.The extracted shape parameters were then used in the modal parameter static camber model with the results compared with those without the lateral-radial coupling shape.The comparison shows that for a general used car tire,the lateral-radial coupling shape has little effect on the tire camber,so the lateral-radial coupling shape can be neglected in the 3-D model.
语种中文 ; 中文
内容类型期刊论文
源URL[http://hdl.handle.net/123456789/31355]  
专题清华大学
推荐引用方式
GB/T 7714
李宝江,管迪华,LI Baojiang,等. 轮胎侧径耦合振型及对三维模型的影响[J],2010, 2010.
APA 李宝江,管迪华,LI Baojiang,&GUAN Dihua.(2010).轮胎侧径耦合振型及对三维模型的影响..
MLA 李宝江,et al."轮胎侧径耦合振型及对三维模型的影响".(2010).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace