QQ客服 官方微博 反馈留言

	基于刚度矩阵的空间变截面梁简化问题
	刘悦 ; 王立平 ; LIU Yue ; WANG Liping
	2010-05-13 ; 2010-05-13
关键词	梁单元 静刚度 单元刚度矩阵 beam element static stiffness element stiffness matrix TB121
其他题名	Simplification of a spatial beam with variable cross sections based on the stiffness matrix
中文摘要	为研究机床的静刚度特性,需要得到其各部件的单元刚度矩阵。机床部件的结构往往是不规则的,因此需要将其等效简化为等截面梁单元,才能得到其单元刚度矩阵。该文对任意变截面梁等效简化为等截面梁单元的问题进行了研究,从建立梁单元的单元刚度矩阵的需要出发,推导出了完整的简化方法。为了验证该简化方法的有效性,利用有限元分析软件ABAQUS 6.51对一个力学模型进行了分析,同时用上述的简化方法对该力学模型进行了计算。将两者的计算结果进行对比,相对偏差小于5%,因此可证明该简化方法在变截面梁等效简化为等截面梁单元时的有效性。; The element stiffness matrixes of a machine tool's parts are needed to analyze the static stiffness performance of the machine tool. The part structure is usually irregular and has to be simplified to obtain the element stiffness matrix. A complete simplification method was developed to simplify a spatial beam with variable cross sections into a beam with a constant cross section. A dynamic model was solved using the finite element analysis (FEA) software ABAQUS 6.51 and was also calculated using the simplification method. Comparison shows that the relative deviations are less than 5%, which verifies the reliability of the developed method in solving the simplification problem of beams with variable cross sections.
语种	中文 ; 中文
内容类型	期刊论文
源URL	[http://hdl.handle.net/123456789/31219]
专题	清华大学
推荐引用方式 GB/T 7714	刘悦,王立平,LIU Yue,等. 基于刚度矩阵的空间变截面梁简化问题[J],2010, 2010.
APA	刘悦,王立平,LIU Yue,&WANG Liping.(2010).基于刚度矩阵的空间变截面梁简化问题..
MLA	刘悦,et al."基于刚度矩阵的空间变截面梁简化问题".(2010).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。