| 用于胶版印刷的可热固化环氧树脂/异氰酸酯体系 | |
| 孙涛 ; 邢晓东 ; 王晓工 ; 连彦青 ; SUN Tao ; XING Xiaodong ; WANG Xiaogong ; LIAN Yanqing | |
| 2010-05-13 ; 2010-05-13 | |
| 关键词 | 胶版印刷 聚合物图案化 环氧树脂类聚合物 热固化 异佛尔酮二异氰酸酯(IPDI) off-set printing patterned polymer epoxy-based polymer thermal curing isphoronethe diisocyanate(IPDI) TS827 |
| 其他题名 | Thermal curable epoxy-based isocyanate for off-set printing |
| 中文摘要 | 提出了一种以聚二甲基硅氧烷(PDMS)为印刷滚筒的、在玻璃基材表面可大面积印刷聚合物图案的胶版印刷技术,并开发了相应的油墨。该油墨由环氧树脂基聚合物BPAN及异佛尔酮二异氰酸酯(IPDI)组成的热固性双组分聚合物体系和红色分散颜料组成。采用原位红外光谱法研究了热固性体系的热固化。结果表明BPAN/IPDI双组分体系有良好的热固化性能。固化薄膜具有良好的耐溶剂性能和光学性能。应用本工艺得到分辨率为100μm的聚合物图案。; An off-set printing method using a polydimethylsiloxane roll was developed for printing polymer patterns on glass substrates over large areas.The printing ink developed for this technique consists of a thermal-curable polymeric system and a red dispersed pigment.The thermal-crosslinking polymeric system was prepared from an epoxy-based polymer(BPAN) and a cross-linking agent,isphoronethe diisocyanate(IPDI).The thermal curing behavior of BPAN/IPDI was measured using in-situ infrared spectroscopy.The results show that the system has excellent thermal curability.The cured polymer film has good solvent-resistance and optical performance.Patterned polymer with resolution of 100 μm has fabricated using the process and the ink. |
| 语种 | 中文 ; 中文 |
| 内容类型 | 期刊论文 |
| 源URL | [http://hdl.handle.net/123456789/30361]  |
| 专题 | 清华大学 |
| 推荐引用方式 GB/T 7714 | 孙涛,邢晓东,王晓工,等. 用于胶版印刷的可热固化环氧树脂/异氰酸酯体系[J],2010, 2010. |
| APA | 孙涛.,邢晓东.,王晓工.,连彦青.,SUN Tao.,...&LIAN Yanqing.(2010).用于胶版印刷的可热固化环氧树脂/异氰酸酯体系.. |
| MLA | 孙涛,et al."用于胶版印刷的可热固化环氧树脂/异氰酸酯体系".(2010). |
| 个性服务 |
| 查看访问统计 |
| 相关权益政策 |
| 暂无数据 |
| 收藏/分享 |
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论