CORC  > 清华大学
螺旋管式直流蒸汽发生器的集总参数动态模型
李海鹏 ; 黄晓津 ; 张良驹 ; LI Hai-peng ; HUANG Xiao-jin ; ZHANG Liang-ju
2010-05-13 ; 2010-05-13
关键词螺旋管式直流蒸汽发生器 动态模型 集总参数 仿真 helical coiled once-through steam generator dynamic model lumped parameter simulation TL353.13
其他题名Lumped Parameter Dynamic Model of Helical Coiled Once-Through Steam Generator
中文摘要基于基本的流体质量、能量和动量守恒原理,建立了10 MW高温气冷堆螺旋管式直流蒸汽发生器的动态数学模型。模型采用了集总参数的建模方法,将蒸汽发生器作为单管模型处理,分为热水段、蒸发段和过热段,且各段间具有可移动的边界。对建立的模型进行了静态和动态仿真,仿真结果表明,所建立的模型是正确和有效的,能够用来进行蒸汽发生器的动态特性仿真。; Based on the conservation of fluid mass,energy,and momentum,a lumped parameter mathematical model of the helical coiled once-through steam generator for 10 MW High-Temperature Gas-Cooled Reactor(HTR-10) was developed.The steam generator is handled with single tube concept and is divided into three regions as sub-cooled region,boiling region and sup-erheater region.And these regions have movable boundaries to simulate the change of the region length.The steady state and dynamic simulation results show that the developed model is accurate and effective to simulate the steam generator dynamics.
语种中文 ; 中文
内容类型期刊论文
源URL[http://hdl.handle.net/123456789/30149]  
专题清华大学
推荐引用方式
GB/T 7714
李海鹏,黄晓津,张良驹,等. 螺旋管式直流蒸汽发生器的集总参数动态模型[J],2010, 2010.
APA 李海鹏,黄晓津,张良驹,LI Hai-peng,HUANG Xiao-jin,&ZHANG Liang-ju.(2010).螺旋管式直流蒸汽发生器的集总参数动态模型..
MLA 李海鹏,et al."螺旋管式直流蒸汽发生器的集总参数动态模型".(2010).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace