基于ABAQUS有限元分析的15万m~3原油储罐强度校核 | |
盛选禹 ; 张宏志 ; SHENG Xuan-yu ; ZHANG Hong-zhi | |
2010-05-13 ; 2010-05-13 | |
关键词 | 储罐 有限元 应力评价 storage tank finite element stress appraisal TE972 |
其他题名 | Strength Check of 15�0~4 m~3 Crude Oil Tank Based on Finite Element Software ABAQUS |
中文摘要 | 采用ABAQUS大型非线性有限元软件,对15万m3双盘式浮顶原油储罐的应力进行了分析,计算出储罐的应力分布,并根据压力容器设计标准,对储罐的应力分布进行了评定。分析表明,储罐在储存原油时是安全的。除最上层和最下层外,储罐壁板的应力分布均匀,并且都保持在一个较高的水平。储罐壁板最大应力位置在下面的第2层罐壁上。储罐底板应力比较低,但边缘底板与壁板焊接部位的内侧应力很高,应力值超过材料的许用应力,但将应力分类后,应力能够满足相关法规要求。; A 15�04 m3 crude oil tank was analyzed by the famous nonlinear finite element software ABAQUS. The stress distribution of the whole tank was calculated and the stress distribution was evaluated based on the design standard of pressure vessel. The analysis shows that the tank is safe for storing crude oil. The stresses in tank wall, except the upper and lower parts of the wall, are at uniformly high level. The highest stress locates at the lower second layer of the wall. The stresses in bottom plates are low. But the stresses at welding inner corner between wall and bottom are higher than the permitted stress of the material. However, by classifying the stresses, they satisfy the relevant standard requirement. |
语种 | 中文 ; 中文 |
内容类型 | 期刊论文 |
源URL | [http://hdl.handle.net/123456789/30090] ![]() |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | 盛选禹,张宏志,SHENG Xuan-yu,等. 基于ABAQUS有限元分析的15万m~3原油储罐强度校核[J],2010, 2010. |
APA | 盛选禹,张宏志,SHENG Xuan-yu,&ZHANG Hong-zhi.(2010).基于ABAQUS有限元分析的15万m~3原油储罐强度校核.. |
MLA | 盛选禹,et al."基于ABAQUS有限元分析的15万m~3原油储罐强度校核".(2010). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论