一种DC-DC升压转换器中的误差放大器的设计 | |
王帆 ; 孙义和 ; 胡俊材 ; 冯翰雪 ; WANG Fan ; SUN Yi-he ; HU Jun-cai ; FENG Han-xue | |
2010-05-12 ; 2010-05-12 | |
关键词 | DC-DC转换器 误差放大器 负载调整率 动态电路 DC-DC converter error-amplifier load-regulation dynamic circuit TM46 |
其他题名 | Design of an Error-Amplifier for a Boost DC-DC Converter |
中文摘要 | 结合DC-DC升压转换器的工作原理,从系统稳定性和负载调整率要求的角度出发,提出了一种新颖的设计方法,以确定误差放大器的主要结构和基本参数.与传统的误差放大器相比,该设计加入了动态电路部分,减少了环路的响应时间.另外,改进的电压移位部分不仅减小了芯片的面积,而且简化了误差放大器的设计.文中设计使用0.5μm-BCD工艺对整个升压转换器系统进行了模拟,并在各种工作条件下对系统进行仿真,得出了理想的仿真结果.; Based on the analysis of system's stability and the demand of load-regulation,a novel method for error-amplifier design is presented.Moreover,a new dynamic circuit is proposed to improve loop transient response.And an improved level-shift is adopted which is helpful to save the die area and simplify the design of error-amplifier.The whole chip is designed with 0.5μm-BCD technology.Simulation results reveal that the system is stable in any case. |
语种 | 中文 ; 中文 |
内容类型 | 期刊论文 |
源URL | [http://hdl.handle.net/123456789/28526] ![]() |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | 王帆,孙义和,胡俊材,等. 一种DC-DC升压转换器中的误差放大器的设计[J],2010, 2010. |
APA | 王帆.,孙义和.,胡俊材.,冯翰雪.,WANG Fan.,...&FENG Han-xue.(2010).一种DC-DC升压转换器中的误差放大器的设计.. |
MLA | 王帆,et al."一种DC-DC升压转换器中的误差放大器的设计".(2010). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论