CORC  > 清华大学
Modeling of the helium-heated steam reformer for HTR-10
Yin, Huaqiang ; Jiang, Shengyao ; Mang, Youjie ; Ju, Huaiming
2010-05-10 ; 2010-05-10
关键词nuclear process heat application HTR-10 hydrogen production helium-heated steam reformer HYDROGEN Nuclear Science & Technology
中文摘要In this study, based on the pseudo-homogeneous one-dimensional model, a steady-state model of the helium-heated steam reformer planned to be connected with the 10MW high temperature gas cooled reactor (HTR-10) has been developed. Good agreement is shown between the simulating results and experimental data. The influence of main process parameters on the performance with respect to the methane conversion and the hydrogen yield is investigated and discussed. The performance increases remarkably with the increase in the inlet helium temperature when it is lower than 1,000 degrees C. Whereas, the effect. becomes weak when the temperature is higher than 1,000 degrees C. The influence of the inlet helium flow rate is not as evident as that of the temperature. The inlet helium pressure and inlet process gas temperature have almost no influence on the performance. The performance increases with the decrease in the inlet process gas pressure. The influence of the inlet process gas flow rate and steam-to-carbon ratio (S/C) is complicated. Optimal values should be chosen for them to obtain a high performance.
语种英语 ; 英语
出版者ATOMIC ENERGY SOC JAPAN ; TOKYO ; 1-1-13 SHIMBASHI MINATO-KU, TOKYO, 105, JAPAN
内容类型期刊论文
源URL[http://hdl.handle.net/123456789/22743]  
专题清华大学
推荐引用方式
GB/T 7714
Yin, Huaqiang,Jiang, Shengyao,Mang, Youjie,et al. Modeling of the helium-heated steam reformer for HTR-10[J],2010, 2010.
APA Yin, Huaqiang,Jiang, Shengyao,Mang, Youjie,&Ju, Huaiming.(2010).Modeling of the helium-heated steam reformer for HTR-10..
MLA Yin, Huaqiang,et al."Modeling of the helium-heated steam reformer for HTR-10".(2010).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace