CORC  > 清华大学
Investigation of nanoindentation on Co/Mo multilayers by the continuous stiffiess measurement technique
Yang, G ; Zhao, B ; Gao, Y ; Pan, F
2010-05-10 ; 2010-05-10
关键词hardness nano-indentation multilayer continuous stiffness measurement MECHANICAL-PROPERTIES THIN-FILMS ELASTIC-MODULUS TIN/(VXNB1-X)N SUPERLATTICES HARDNESS ENHANCEMENT CU/NI MULTILAYERS CU FE(001)/PT(001) MICROSTRUCTURE STRENGTH Materials Science, Coatings & Films Physics, Applied
中文摘要The mechanical properties of evaporated Co/Mo multilayers with periodicity of 4-16 nm were investigated. The microstructures of the films were analyzed using X-ray diffraction and transmission electron microscopy. Continuous stiffness measurement technique was used in the nanoindentation tests to determine the hardness and elastic modulus of the films. A Hall-Petch-like behavior is observed in the Co/Mo multilayers, in which the fitting parameter n is found as large as 0.93. Other possible mechanisms are also proposed to explain this behavior. The peak hardness, approximately 2.1 times of the rule-of-mixtures value is obtained for the periodicity of 7 nm. When the periodicity is reduced to 4 nm, a hardness decrease observed is attributed to the interface alloying. (C) 2004 Elsevier B.V. All rights reserved.
语种英语 ; 英语
出版者ELSEVIER SCIENCE SA ; LAUSANNE ; PO BOX 564, 1001 LAUSANNE, SWITZERLAND
内容类型期刊论文
源URL[http://hdl.handle.net/123456789/21373]  
专题清华大学
推荐引用方式
GB/T 7714
Yang, G,Zhao, B,Gao, Y,et al. Investigation of nanoindentation on Co/Mo multilayers by the continuous stiffiess measurement technique[J],2010, 2010.
APA Yang, G,Zhao, B,Gao, Y,&Pan, F.(2010).Investigation of nanoindentation on Co/Mo multilayers by the continuous stiffiess measurement technique..
MLA Yang, G,et al."Investigation of nanoindentation on Co/Mo multilayers by the continuous stiffiess measurement technique".(2010).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace