QQ客服 官方微博 反馈留言

	Electrophoretic deposition of BaTiO3 films from aqueous suspensions
	Zhao, Jianling ; Wang, Xiaohui ; Li, Longtu
	2010-05-10 ; 2010-05-10
关键词	ceramics electrophoretic deposition (EPD) barium titanate aqueous suspension LAYERED CERAMICS FABRICATION Materials Science, Multidisciplinary
中文摘要	It was found that BaTiO3 powder could be well dispersed in water using 0.3 wt.% poly(acrylic acid-co-maleic acid) as a dispersant at pH 10. The suspension characteristics were studied in terms of zeta potential and viscosity. Stable suspensions with 5 wt.% BaTiO3 were chosen for the electrophoretic deposition. Voltages between 2 and 6 V were applied to fabricate uniform and defect free BaTiO3 films with a thickness up to 20 mu m. The results show that electrophoretic deposition from aqueous suspension is a feasible, low-cost and environmentally benign method to form BaTiO3 thin and thick films. (c) 2005 Elsevier B.V. All rights reserved.
语种	英语 ; 英语
出版者	ELSEVIER SCIENCE SA ; LAUSANNE ; PO BOX 564, 1001 LAUSANNE, SWITZERLAND
内容类型	期刊论文
源URL	[http://hdl.handle.net/123456789/20736]
专题	清华大学
推荐引用方式 GB/T 7714	Zhao, Jianling,Wang, Xiaohui,Li, Longtu. Electrophoretic deposition of BaTiO3 films from aqueous suspensions[J],2010, 2010.
APA	Zhao, Jianling,Wang, Xiaohui,&Li, Longtu.(2010).Electrophoretic deposition of BaTiO3 films from aqueous suspensions..
MLA	Zhao, Jianling,et al."Electrophoretic deposition of BaTiO3 films from aqueous suspensions".(2010).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。