Characterization of LiFePO/sub 4/ synthesized by sol-gel processing
Junbiao Lu
; Zhongtai Zhang
; Zilong Tang
; Wanci Shen
2010-05-10
; 2010-05-10
会议名称 Key Engineering Materials
; 3rd International Conference on High-Performance Ceramics (CICC-3)
; Shenzhen, China
; INSPEC
关键词 Practical
Experimental/ crystal microstructure
crystallisation
electrochemistry
iron compounds
lithium compounds
powder technology
scanning electron microscopy
secondary cells
sintering
sol-gel processing
transmission electron microscopy
X-ray diffraction/ LiFePO/sub 4/ powder synthesis
sol-gel processing
SEM
XRD
TEM
surface area measurement
quantachrome NOVA automated gas sorption system
cylindrical battery
sintering
crystallisation
crystal microstructure
electrochemistry
850 degC
LiFePO/sub 4// A8120L Preparation of ceramics and refractories
A8120E Powder techniques, compaction and sintering
A6480G Microstructure
A6470K Solid-solid transitions
A8245 Electrochemistry and electrophoresis
A8630F Secondary cells
B8410E Secondary cells/ temperature 1.12E+03 K/ LiFePO4/sur PO4/sur Fe/sur Li/sur O4/sur O/sur P/sur LiFePO4/ss PO4/ss Fe/ss Li/ss O4/ss O/ss P/ss
中文摘要 LiFePO/sub 4/ powder was obtained by sol-gel processing and was characterized by SEM, XRD, TEM, and surface area measurement of quantachrome NOVA automated gas sorption system. The cathode performance was evaluated using cylindrical battery. Cycle at C/10, samples sintered at 850 degrees C with specific surface area of 188.5 M/sup 2//g deliver capacity of 157.5 mAh/g and cycle dozens of times without obvious capacity fade.
会议录出版者 Trans Tech Publications
; Switzerland
语种 英语
; 英语
内容类型 会议论文
源URL [http://hdl.handle.net/123456789/18306 ]
专题 清华大学
推荐引用方式 GB/T 7714
Junbiao Lu,Zhongtai Zhang,Zilong Tang,et al. Characterization of LiFePO/sub 4/ synthesized by sol-gel processing[C]. 见:Key Engineering Materials, 3rd International Conference on High-Performance Ceramics (CICC-3), Shenzhen, China, INSPEC.
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论