CORC  > 清华大学
X-pinch experiments with pulsed power generator (PPG-1) at Tsinghua University
Liu, R. ; Zou, X. ; Wang, X. ; He, L. ; Zeng, N.
2010-05-06 ; 2010-05-06
关键词pulsed power generator X-pinch Physics, Applied
中文摘要The test on an X-pinch device powered by a pulsed power generator (PPG-I) was candied out step by step. In the first step, a brass rod of 6 mm in diameter was used as a load to replace the X-pinch load. The results of the first step shows that all the current, about 200 kA in amplitude, output from PPG-I flows through the load and no breakdown or flashover in vacuum of the load section happens. The waveform of the current from PPG-I measured with a wall resistor coincides exactly with that of the load current measured with a Rogowski coil, which indicates that the calibrations of the wall resistor and Rogowski coil are correct. In the second step, an X-pinch load made of two molybdenum wires of 40 mu m in diameter was used. It was found that the distance between the cathode and anode affects considerably the operation of the device. While breakdown in vacuum happens for the distance equal to 30 mm, it works very well for the distance equal to 16 mm. The reason for this phenomenon was given.
语种英语 ; 英语
出版者CAMBRIDGE UNIV PRESS ; NEW YORK ; 32 AVENUE OF THE AMERICAS, NEW YORK, NY 10013-2473 USA
内容类型期刊论文
源URL[http://hdl.handle.net/123456789/11312]  
专题清华大学
推荐引用方式
GB/T 7714
Liu, R.,Zou, X.,Wang, X.,et al. X-pinch experiments with pulsed power generator (PPG-1) at Tsinghua University[J],2010, 2010.
APA Liu, R.,Zou, X.,Wang, X.,He, L.,&Zeng, N..(2010).X-pinch experiments with pulsed power generator (PPG-1) at Tsinghua University..
MLA Liu, R.,et al."X-pinch experiments with pulsed power generator (PPG-1) at Tsinghua University".(2010).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace