基于等效膜层法的极紫外光刻含缺陷掩模多层膜仿真模型

CORC > 上海光学精密机械研究所 > 中国科学院上海光学精密机械研究所 > 信息光学与光电技术实验室

	基于等效膜层法的极紫外光刻含缺陷掩模多层膜仿真模型
	刘晓雷 ; 李思坤 ; 王向朝
刊名	光学学报
	2015
卷号	35 期号:6 页码:622005
其他题名	Simulation Model Based on Equivalent Layer Method for Defective Mask Multilayer in Extremeultra violet Lithography
通讯作者	Liu Xiaolei, Laboratory of Information Optics and Opto-Electronic Technology, Shanghai Institute of Optics and Fine Mechanics Chinese Academy of Sciences, Shanghai 201800, China. ; Li Sikun, Laboratory of Information Optics and Opto-Electronic Technology, Shanghai Institute of Optics and Fine Mechanics Chinese Academy of Sciences, Shanghai 201800, China. ; Wang Xiangzhao, Laboratory of Information Optics and Opto-Electronic Technology, Shanghai Institute of Optics and Fine Mechanics Chinese Academy of Sciences, Shanghai 201800, China.
中文摘要	建立了一个基于等效膜层法的极紫外光刻含缺陷掩模多层膜仿真模型。通过等效膜层法求解含缺陷多层膜无缺陷区域和含缺陷区域不同位置的反射系数,准确快速地仿真含缺陷多层膜的衍射谱。与波导法严格仿真相比,200 nm尺寸时仿真速度提高9倍左右。与改进单平面近似模型和基于单平面近似的简化模型相比,该模型对衍射谱和空间像的仿真精度有了较大提高,并且仿真精度随缺陷尺寸和入射角的变化很小。以+ 1级衍射光为例,6。入射时,与改进单平面近似模型和简化模型相比,该模型对衍射谱振幅的仿真误差分别减小了77%和63%。
英文摘要	A model based on the equivalent layer method is developed to simulate defective mask multilayer in extreme ultraviolet (EUV) lithography. In this model, the defective multilayer is divided into defect free region and defective region. The reflection coefficients of two regions in different locations are computed by the equivalent layer method. The spectrum of defective multilayer can be obtained fast and accurately. Simulation time of the proposed model is 1/9 times that of the waveguide method for a multilayer of 200 nm size. Compared with advanced single surface approximation (SSA) model and the simplified model based on SSA, the simulation accuracy of the multilayer spectrum and aerial image of the proposed model is improved. The errors of simulated amplitude and aerial image are also with little fluctuation in different defect sizes and incidence angles. Taking + 1 order diffraction as an example, compared with advanced SSA model and the simplified model based on SSA, in 6° incidence angle, the simulated amplitude error of the proposed model decreased as much as 77% and 63%, respectively.
收录类别	EI
原文出处	http://www.opticsjournal.net
语种	中文
内容类型	期刊论文
版本	出版稿
源URL	[http://ir.siom.ac.cn/handle/181231/14173]
专题	上海光学精密机械研究所_信息光学与光电技术实验室
作者单位	1.刘晓雷, 中国科学院上海光学精密机械研究所, 中科院信息光学与光电技术实验室, 上海 201800, 中国. 2.李思坤, 中国科学院上海光学精密机械研究所, 中科院信息光学与光电技术实验室, 上海 201800, 中国. 3.王向朝, 中国科学院上海光学精密机械研究所, 中科院信息光学与光电技术实验室, 上海 201800, 中国.
推荐引用方式 GB/T 7714	刘晓雷,李思坤,王向朝. 基于等效膜层法的极紫外光刻含缺陷掩模多层膜仿真模型[J]. 光学学报,2015,35(6):622005.
APA	刘晓雷,李思坤,&王向朝.(2015).基于等效膜层法的极紫外光刻含缺陷掩模多层膜仿真模型.光学学报,35(6),622005.
MLA	刘晓雷,et al."基于等效膜层法的极紫外光刻含缺陷掩模多层膜仿真模型".光学学报 35.6(2015):622005.