Compact design of projection lens for 3D profilometry based on interferometric fringes

CORC > 上海光学精密机械研究所 > 中国科学院上海光学精密机械研究所 > 空间激光信息技术研究中心

	Compact design of projection lens for 3D profilometry based on interferometric fringes
	Zhu, Yongjian ; Pan, Weiqing ; Sun, Jianfeng ; Li, Anhu ; Li, Yong
刊名	optik
	2013
卷号	124 期号:3 页码:209
通讯作者	zhu, yj (reprint author), zhejiang univ sci & technol, hangzhou 310023, zhejiang, peoples r china.
英文摘要	as for the new type of 3d fringe-based profilometry we proposed, a compact projection lens is designed to meet the requirements of interferometric fringes magnification. fringe projection profilometry requires that the projection lens has super short focus length and wide field of view (fov) as well as large projection area as possible. in this case, the measurement system is able to capture a frame of fringe map with enough information of object and achieve a high accuracy. thus the projection lens was designed with focus length of 9.45 mm, f-number of 2.8 and fov of 72.45 degrees. the total track of lens was 76.355 mm, less than 80 mm. the projection resolutions were 800 x 600 pixels. the lens design showed that the modulation transfer function (mtf) is higher than 80% at 32 lp/mm for all field angles. the maximum distortion was about -3.0% at field angle of 72.45 degrees. according to the size requirement of measured object, the projection area was 40 '' at the distance of 1 m. therefore, the compact lens design with super short focus length and wide fov as well as large projection area is absolutely adaptable for the 3d fringe-based profilometry which is shown in this paper. meanwhile, the proposed lens design could also be used for the mini lcos (liquid crystal on silicon) projector. (c) 2011 elsevier gmbh. all rights reserved.
收录类别	SCI
语种	英语
内容类型	期刊论文
版本	出版稿
源URL	[http://ir.siom.ac.cn/handle/181231/15016]
专题	上海光学精密机械研究所_空间激光信息技术研究中心
作者单位	1.[Zhu, Yongjian 2.Pan, Weiqing 3.Li, Yong] Zhejiang Univ Sci & Technol, Hangzhou 310023, Zhejiang, Peoples R China 4.[Sun, Jianfeng] Chinese Acad Sci, Shanghai Inst Opt & Fine Mech, Shanghai 201800, Peoples R China 5.[Li, Anhu] Tongji Univ, Sch Mech Engn, Shanghai 200092, Peoples R China
推荐引用方式 GB/T 7714	Zhu, Yongjian,Pan, Weiqing,Sun, Jianfeng,et al. Compact design of projection lens for 3D profilometry based on interferometric fringes[J]. optik,2013,124(3):209.
APA	Zhu, Yongjian,Pan, Weiqing,Sun, Jianfeng,Li, Anhu,&Li, Yong.(2013).Compact design of projection lens for 3D profilometry based on interferometric fringes.optik,124(3),209.
MLA	Zhu, Yongjian,et al."Compact design of projection lens for 3D profilometry based on interferometric fringes".optik 124.3(2013):209.