Thermal aberration in precision optical system | |
Zhang, W.; X.-F. Yu; L.-S. Zhou; X.-L. Wang; M.-Y. Ni and H.-F. Peng | |
刊名 | Guangxue Jingmi Gongcheng/Optics and Precision Engineering
![]() |
2015 | |
卷号 | 23期号:11页码:3033-3040 |
英文摘要 | To control and compensate the thermal aberration of objective lens accurately, a special three lens integrated experiment optical system was designed, and the calculation method for the thermal aberration was verified based on the designed system. Firstly, thermal aberration simulation method and corresponding verified experiment were introduced. Then, a series of experiments were carried out in different thermal load conditions and comparison of experimental and simulated results were also presented. Finally, combining experimental and simulated results, asymmetric aberrations and focus drift trends of the optical system under a certain thermal load were analyzed, and transient properties of thermal aberration were obtained. The results show that the ratios of RMS(Root Mean Square) values of thermal aberration from the experiments and simulations are 1:3.75:9.00 and 1:4.01:9.01 when the thermal load ratio of the optical system is 1:4:9. The data suggests that the thermal aberration is proportional to a heat load it suffers. For transient thermal aberration, simulation results show that stable time of the best focus position is less than 450 min whereas the stable time of Z4and Z11are 48 min and 9 min respectively. The stable time of best focus is much longer than that of asymmetrical aberration. Thermal aberration properties obtained through the three lens integrated optical system provide references for thermal aberration reduction and calibration strategies both for lithography objective lenses and other similar optical systems. 2015, SCIENCE PRESS. All right reserved. |
收录类别 | EI |
内容类型 | 期刊论文 |
源URL | [http://ir.ciomp.ac.cn/handle/181722/56141] ![]() |
专题 | 长春光学精密机械与物理研究所_中科院长春光机所知识产出 |
推荐引用方式 GB/T 7714 | Zhang, W.,X.-F. Yu,L.-S. Zhou,et al. Thermal aberration in precision optical system[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2015,23(11):3033-3040. |
APA | Zhang, W.,X.-F. Yu,L.-S. Zhou,X.-L. Wang,&M.-Y. Ni and H.-F. Peng.(2015).Thermal aberration in precision optical system.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,23(11),3033-3040. |
MLA | Zhang, W.,et al."Thermal aberration in precision optical system".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 23.11(2015):3033-3040. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论