Modal method based dynamic analysis of cantilever type elastic structures

CORC > 长春光学精密机械与物理研究所 > 中国科学院长春光学精密机械与物理研究所 > 中科院长春光机所知识产出

	Modal method based dynamic analysis of cantilever type elastic structures
	Xue, Z.-P.; M. Li; H.-G. Jia and Z.-Y. Luo
刊名	Guangxue Jingmi Gongcheng/Optics and Precision Engineering
	2015
卷号	23 期号:8 页码:2250-2257
英文摘要	For the elastic deformation of cantilever type elastic structures in a flat spring landing gear, a new modal warp method was proposed to improve the calculation precision of the traditional modal method. Firstly, the description of a rotational component in infinitesimal deformation was deduced based on the finite element theory. Then the general modal method was summarized and how to introduce the rotational deformation into the dynamic equation in a modal coordinate was proposed. By which, the rotational deformation was introduced into the analysis of structure dynamics, so that the modal method could simulate the large bending and/or twisting deformation. Finally, the static simulation and experiments were performed and compared on the flat spring landing gear. The analysis results show that when the load mass is less than 100 kg, the relative errors are below 5% for both the linear modal method and modal warping method. However, when the load reaches to 180 kg (which represents the maximum realistic condition for landing), the error of the modal warp method remains within 10% and the error of linear modal has been more than 35%. Moreover, the time steps of both modal methods are 1 ms. As comparied with the traditional method, the modal warping method provides higher calculation and efficiency in the simulation of large rotational deformation. , 2015, Chinese Academy of Sciences. All right reserved.
收录类别	EI
内容类型	期刊论文
源URL	[http://ir.ciomp.ac.cn/handle/181722/56119]
专题	长春光学精密机械与物理研究所_中科院长春光机所知识产出
推荐引用方式 GB/T 7714	Xue, Z.-P.,M. Li,H.-G. Jia and Z.-Y. Luo. Modal method based dynamic analysis of cantilever type elastic structures[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2015,23(8):2250-2257.
APA	Xue, Z.-P.,M. Li,&H.-G. Jia and Z.-Y. Luo.(2015).Modal method based dynamic analysis of cantilever type elastic structures.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,23(8),2250-2257.
MLA	Xue, Z.-P.,et al."Modal method based dynamic analysis of cantilever type elastic structures".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 23.8(2015):2250-2257.