偏振光飞秒双脉冲微加工

CORC > 上海光学精密机械研究所 > 中国科学院上海光学精密机械研究所 > 信息光学开放实验室

	偏振光飞秒双脉冲微加工
	韩泽华 ; 周常河 ; 戴恩文 ; 谢金
刊名	中国激光
	2008
卷号	35 期号:5 页码:768
关键词	激光技术飞秒激光微加工金属薄膜偏振双脉冲微突起 Femtosecond laser micromaching Laser technique Metal film Microbumps Polarized double pulses
ISSN号	0258-7025
其他题名	Micromaching with polarized light femtosecond double pulses
中文摘要	利用具有纳焦能量、高重复频率的偏振光飞秒双脉冲对金属铬膜样品进行微加工,样品表面都会产生微突起状结构,它们的宽度在0～400 ps的双脉冲时延范围内没有明显的变化,但高度却都在1～10 ps的双脉冲时延范围内呈现明显的下降,在此时延范围之外并没有明显的变化。通过加工样品的扫描电子显微镜(SEM)图片发现,对于偏振光,利用双脉冲方法,可以获得更好的加工质量。并且线偏振光得到的微突起状结构比较细长,在入射光束的偏振方向上有所伸长;圆偏振光得到的微突起状结构比较接近圆形。即在低脉冲能量、高重复频率情况下,具体的微加工特征形貌与入射光束的偏振状态有关。; Microbump structures were formed on the sample surface after micromachining the Cr films by polarized femtosecond double pulses with nanojoule energy and high repetition rate. Although the widths of the microbumps have no obvious variation among the 0-400 ps double pulses delay, the heights of them exhibit an obvious drop among the 1-10 ps double pulses delay and have no obvious variation beyond this delay. It is helpful to understand the electron-phonon coupling process in metal film during femtosecond laser micromaching. Furthermore, better micromachining quality was acquired with double pulses method for both linearly and circularly polarized light according to the scanning electronic microscope (SEM) images. Contrast to nearly circular microbumps fabricated by circularly polarized light, the microbumps fabricated by linearly polarized light is narrow and stretched in the direction of polarization of the incident beam. Namely, the micromachining feature is related to the polarized state of the incident beam with low pulse energy and high repetition rate.
收录类别	EI
语种	中文
公开日期	2009-09-18
内容类型	期刊论文
源URL	[http://ir.siom.ac.cn/handle/181231/2272]
专题	上海光学精密机械研究所_信息光学开放实验室
推荐引用方式 GB/T 7714	韩泽华,周常河,戴恩文,等. 偏振光飞秒双脉冲微加工[J]. 中国激光,2008,35(5):768, 771.
APA	韩泽华,周常河,戴恩文,&谢金.(2008).偏振光飞秒双脉冲微加工.中国激光,35(5),768.
MLA	韩泽华,et al."偏振光飞秒双脉冲微加工".中国激光 35.5(2008):768.